The Necessary Drywall Tools Including Directions

In order to install dry wall correctly and for it to look like a superior done job, the drywall tools used as well as learning to use them correctly is essential. There are a few tools that are necessary for installing drywall. Some of the necessary tool for drywalling are as follows. Both a corner trowel and a plaster trowel should be purchased along with a block sander with sand paper or a hand sander can be used as long as the handle is well made. The sand paper used should be of 100 and 220 grit. For further sanding, it is necessary to have a sanding pole to reach the hard to get surfaces of the ceiling and corners. To install the drywall screws appropriately a cordless drill is necessary as well. Some of the simpler tools but not any less important include: tape measure, utility knife, both 4.5 and 10 inch steel knife, and a mud pan. If possible, the mud pan should be stainless steel to alleviate the problem of rusting. A t-square that is at least a four foot square is necessary so that it can properly be used for dry wall sheets. A keyhole saw is also required for the labor and installation.

Power Tool Combo

Supplies for drywall are just as important as the drywall equipment. Some of the supplies include paper tape, dry wall compound, drywall sheets, screws, nails, drop cloths, and steel ruler. Paper tape is used so that the steel knife moves more effortlessly over it. As well, the drywall compound should be all purpose so that it remains as smooth as possible.

Power Tool Combo

Instructions for using the drywall tools can be found on the internet as well as attending work shops at local hardware stores. One of the key hints that can be given to beginners is to take as much time as necessary to complete the project. The project should not be hastily completed or it will not look professional. The second hint is to form a plan on paper including all accurate measurements. This will allow the number of drywall sheets to be purchased with some extra just in case. It is also a good idea to think about what kind of drywall is needed especially for places that are damp or are likely to have moisture.

When applying the drywall it should be started by the ceiling and then movement downwards. The seams should be as tight as possible and this will help keep the sanding and smoothing later to a minimum. The sheets can be measured with the t-square and then marked with the utility knife and broken in place. The sheets should be put up on the walls in such a way to reduce the amount of seams. The joints are then taped over. Tape firmly and smooth with the finishing steel knife. The knife should be used to smooth compound and the corner tool for smoothing compound in the corners. It should then dry for at least a day and then sanded. The second coat can then be put on and this wait time continued until completion of the third coat. If these tips are used the best results should be obtained.

The Necessary Drywall Tools Including Directions

Power Tool Combo

Special Price!!! Makita LXT702 18-Volt LXT Lithium-Ion Cordless 7-Piece Combo Kit

Nov 07, 2011 16:25:52

Click for larger image and other views

>> Click here to update Cheapest prices for Makita LXT702 18-Volt LXT Lithium-Ion Cordless 7-Piece Combo Kit <<

Makita LXT702 18-Volt LXT Lithium-Ion Cordless 7-Piece Combo Kit Feature

• 7 lithium-ion cordless tools for drilling, driving, fastening, sawing, grinding, and more
• Ideal for pro contractor trades such as HVAC, plumbing, electrical, and remodeling
• 30-minute rapid optimum charger communicates with battery's built-in chip during the charging process
• LXT lithium-ion battery, Energy Star 30-minute rapid optimum charger producs 430-percent total lifetime work, 2.5X more cycles
• 3-year warranty on tools, 1-year warranty on batteries and charger

Makita LXT702 18-Volt LXT Lithium-Ion Cordless 7-Piece Combo Kit Overview

The Makita 18V LXT Lithium-Ion Cordless Seven-Piece Combo Kit is built for the pro-user who demands a wide range of Best in Class cordless solutions. The LXT702 delivers Seven Lithium-Ion cordless tools for drilling, driving, fastening, cutting, grinding, demolition, and more. Each tool is powered by Makita's 18V LXT Lithium-Ion battery and the ENERGY STAR rated Makita Rapid Optimum Charger.

View larger

LXT702 18V LXT Lithium-Ion Cordless Seven-Piece Combo Kit Includes: 1/2" Hammer Driver-Drill Model BHP452Z See details Impact Driver Model BTD141Z See details Reciprocating Saw Model BJR182Z See details 6-1/2" Circular Saw Model BSS611Z See details 4-1/2" Cut-Off / Angle Grinder Model BGA452Z See details Flashlight Model BML185 See details Job Site Radio Model BMR100W See details Two 18V LXT batteries Rapid optimum charger Contractor bag

A Wide Range of Best in Class Cordless Solutions
Makita's LXT702 includes a 1/2-inch hammer driver-drill with 450 in.lbs. of Max Torque (BHP452Z), a powerful impact driver that weighs only 3.4 pounds (BTD141Z), a 6-1/2-inch circular saw that will cut 2X material at 45 degrees (BSS611Z), a recipro saw with 2,900 SPM (BJR182Z), and a 4-1/2-inch angle grinder with 10,000 RPM (BGA452Z). Accessories include a rechargeable flashlight with Xenon bulb (BML185), and an FM/AM Job Site Radio with iPod/mp3 player compatibility (BMR100W). The LXT702 also includes two 18V LXT Lithium-Ion batteries and a Rapid Optimum Charger for increased battery and charging power -- and less downtime on the job site.

Built for a Variety of Applications
The LXT702 delivers a wide range of cordless solutions for drilling, driving, fastening, cutting, grinding, demolition, and more. It's ideal for pro trades including HVAC, plumbing, electrical, remodeling, concrete, and any pro contractor who requires a Best in Class engineered cordless combo kit. The LXT702 is just another example of Makita's commitment to innovative technology and best-in-class engineering.

About Makita's 18V LXT Lithium-Ion Cordless Tool Series
As one of the pioneers driving the cordless tool revolution, Makita changed the game with its breakthrough 18V LXT Lithium-Ion Cordless Series. Three years after its debut, Makita's LXT Series has grown from seven to over 35 tools, providing a wide range of cordless solutions for professional tradesmen. Makita also added 18V Compact Lithium-Ion for cordless power in a more compact size. Makita's 18V Lithium-Ion batteries and ENERGY STAR rated Optimum Charging System provide several benefits over old battery technology. When compared to traditional 18V Ni-Cd batteries, Makita's 18V Lithium-Ion batteries have 40% less weight, longer run time, and five-times lower self-discharge to keep cells active and ready to use at any time.

Makita's 18V Lithium-Ion battery delivers 2,000 cycles -- 2.5X more than Ni-Cd. In addition, built-in shock absorbing features help protect the battery, and sixteen firm-holding contact terminals deliver constant high power. During the charging process, a built-in memory chip in the battery communicates with the Optimum Charger for a more efficient charge, extending the battery life. Makita's Optimum Charger is also faster: it will charge an 18V LXT Lithium-Ion battery in just 30 minutes, and an 18V Compact Lithium-Ion battery in only 15 minutes. Makita also offers a Rapid Automotive Charger for 18V LXT and 18V Compact Lithium-Ion batteries that plugs into 12V DC sockets equipped in most automobiles and trucks for added mobility. Makita's growing line of LXT cordless tool solutions features a wide range of industrial-quality power tools, including driver-drills, impact drivers, impact wrenches, saws, grinders, screwguns, rotary hammers, and more. The LXT Series also offers a jobsite radio, rechargeable flashlights, and several different combo kits.

About Makita
Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.

Warranty
Every Makita Lithium-Ion tool is backed by Makita's 3-Year Warranty that covers repair due to defects in materials or workmanship up to three years from the date of original purchase. Makita Lithium-Ion batteries and chargers have a limited 1-year warranty. Please see makitatools.com for complete details.

What's in the Box
Makita LXT70two 18V LXT Lithium-Ion Cordless Seven-Piece Combo Kit includes: 1/2-Inch Hammer Driver-Drill, 6-1/2-Inch Circular Saw, Impact Driver, Reciprocating Saw, 4-1/2-Inch Cut-Off/Angle Grinder, Flashlight, Job Site Radio, two LXT Lithium-Ion batteries, 30-Minute Rapid Optimum Charger, contractor bag with wheels and telescoping handle.

Other Makita Lithium-Ion Series

More 18V Lithium-Ion Tools from Makita See the entire 18V Lithium-Ion Lineup

Driver-Drills Impact Drivers Impact Wrenches BHP454 BDF451 BDF452 BDA350 BTD144 BTW450 BTW251 BTL063

Concrete Metalworking Combo Kits BHR240 BCS550 BPB180 LXT1500 15-Tool Kit LXT1200 12-Tool Kit LXT902 9-Tool Kit

SAVE NOW on the special offers below!

Available In Stock.

This Makita LXT702 18-Volt LXT Lithium-Ion Cordless 7-Piece Combo Kit ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Limited Offer Today!! Makita LXT702 18-Volt LXT Lithium-Ion Cordless 7-Piece Combo Kit Black Friday and Cyber Monday Deals

Dewalt 18 Volt Tv 1080P 120Hz Samsung Moniters

Power Washers

A power washer is a machine that can clean different types of surfaces using water pressure. Power washers can generate significant water pressure as compared to a garden hose. A power washer can increase a garden hose's pressure by 20 to 50 times or more.

Power Tool Combo

The main purpose of a power washer is to increase the pressure output from the garden hose and focus the water into a pressurized stream. The machine runs by using gasoline powered or electric engines. The pump works as a compressor. It allows power washers to output pressurized and concentrated steam of water.

Power Tool Combo

Of the numerous power washers available in the market, the industrial power washers are most durable. It can wash out even the toughest stains from different surfaces like painted surfaces, concrete as well as metal and so much more. Buying industrial power washers are tough because of the factors such as power, maintenance, repair, along with its accessories. The functionality and life of industrial power washers depend significantly on the quality of the parts used in its construction.

There are also RAC power washers that are available either in the form of a kit and as a whole unit. RAC power washers are efficient in blasting away stains and cleaning it perfectly. Several features that have been incorporated in the machine include the auto stop and start button, extending the life of the motor, outlet pressure is adjustable, having a capacity of 500 liters per hour. It also has a water volume and pressure indicators.

Power washers generally have basic parts that work it run efficiently. The chemical washer injector allows the chemical or soap to be injected into the water stream to make cleaning even easier and faster.

The motor or engine is the energy source that powers the high pressure pump. The electric models are used for domestic purposes such as cleaning your vehicle, compound or car pouch. These gas models are more portable and for outdoor usage. Diesel powered engines have the longest working life and the most durable.

Frames support the working mechanics of the power washers. It can be made of stainless steel or aluminum, or powder coated to increase resistance to corrosion.

The pump of power washers are drawing water from an outside source, commonly a garden hose attached to the faucet and pushes it with an amount of force that produces pressure as high as 4000 to 5000 PSI.

There are two types of pressure hoses such as wire-braid high-pressure hoses and the non-marking pressure hoses. The wire-braid high-pressure hose is strong, for more 4500 PSI. The non-marking pressure hose is yellow or gray and can be freely used on any surface without the risk.

Trigger gun controls the flow of water. The flow is simply active by squeezing the trigger. It is stopped when the trigger is released.

Cavitation is caused when the air gets into your pump. It is also known as starving the pump.

And last is the safety relief valve, the designated weak area that points to the pressure washer system.

Power Washers

Power Tool Combo

Unisex Watch Natural Vitamin

The Rockwell Band Saw is Quality Combined With Value in Power Saws

Low price is low quality. That is not true with the Rockwell band saw. Even if it has a very affordable price, the Rockwell saw is durable and performs reliably and accurately.

Power Tool Combo

Low price is equal to low quality. In the advent of China-made products, that old business maxim never sounded so truthful. Just compare super affordable blue jeans that came out of a run-down factory in China to a rather expensive one produced by one of few remaining factories in the US. Which possesses finer cloth quality? Which retains its color longer? The question is almost a no-brainer: Blue jeans made in the US are just better quality.

Power Tool Combo

Yet there are times when low-priced does not necessarily translates into low quality. There are exceptions to the rule, as the old saying goes. There are still manufacturers that produce high quality products at affordable rates. What is the secret to their low rates? Sweat-shop labor rates ranks as the obvious first thought, but it is not.

Almost two-third of the total cost of an expensive product from so-called big companies comes from expensive advertisements, such as NASCAR and other pro sports sponsorships, as well as rather exorbitant bonuses to company big wigs. The fact is that only about one-third of the total market cost is the actual price.

At Rockwell, the prevailing philosophy is keep things simple. They do not spend much on expensive ad campaigns over the TV and internet. Nor do they sponsor mega sporting events. And their bosses do not command sky-high bonuses. That is why they sell their products at such a low rate without compensating quality.

Thus it is definitely true that a Rockwell band saw is both low-priced and high-quality.

If you are a woodworking enthusiast or a metalworking fanatic, then maybe you should consider getting a Rockwell band saw for your workshop. Why choose a Rockwell saw aside from the low price? Two common reasons are that they are very reliable and durable.

One particular example is the Rockwell nine inch band saw. With a 2.5 amp motor, the Rockwell nine inch band saw is one of the most affordable bench-top band saws out in the market. It does not, however, mean that its performance is subpar compared to other band saws made by bigger saw makers.

The Rockwell nine inch band saw is made of tough materials, such as aluminum. Do not belittle the size of this bench-top saw, for it can definitely perform heavy-duty work from hours on end. And the great thing is that it has mechanisms that will ensure you to make accurate cuts over and over and over again.

That certainly is a big bonus when you are using a band saw. Whether you are a woodworker or a metalworker, one thing that you do not want to do is to make inaccurate cuts. It would be time consuming doing repeat cuts, so a band saw that would offer optimum precision would really provide a great help. And that is what Rockwell band saw can do in a daily basis.

In terms of durability, the Rockwell band saw ranks as one of the best. It is one of Rockwell's major commitments: making durable saws. And that is not just plain talk. Just search the internet and you will find an online auction site that sells vintage Rockwell 14 inch band saw that was made way back in the late 80s or early 70s.

The Rockwell Band Saw is Quality Combined With Value in Power Saws

Power Tool Combo

32Gb Flash Usb Surround Sound Home Stereo

Handy Tool Box

Have you ever been trying to find a screwdriver to take the screws out of a toy while a child stands there crying because its toy has dead batteries? Well with a multipurpose tool makes a handy toolbox that you can wear on your hip in its own sheath.

Power Tool Combo

Multipurpose tools have a variety of different configurations for the different applications that they can be used for. Having a handy toolbox on your hip makes that extra walking around to find that small screwdriver that is needed to replace those batteries, or worse when the power is out and you need to change the batteries in a lighting source.

Power Tool Combo

The small toolbox on your hip should also have a pair of pliers of one sort or another. Needle nose or regular pliers are very handy when you need to grab something hot or very cold and you aren't wearing gloves. Pliers come in handy when tying with wire so it will hold in place or crimping an electrical connector on a wire in an emergency situation. Which nobody likes being in an emergency situations, but they do happen.
The pliers also make removing the fish hook from the fish much easier, without having to carry one in your tackle box. They do make a good addition to any tackle box without taking up to much valuable space. It provides screwdrivers and pliers to fix a fishing reel while out at the fishing hole.

Many of the multipurpose tools have a lanyard so it will make it easier to attach it to the fishing vest or life jacket so it will not be dropped into the water and lost. With the lanyard, pliers, and screwdrivers it is almost a necessity for any tackle box or weekend fisherman.

Multipurpose tools also have a Phillips screwdriver or two of different sizes to provide you with the right tool for the job, a stripped out Phillips screw is a real problem to remove. Phillips screws are one of those special holding devices that need special designed tools to remove without damaging. So having two different sizes makes the job easier to complete. Carrying a multipurpose tool can make chore of removing and replacing the Phillips screw easy and quickly accomplished.

Some multipurpose tools have adapters that allow you to change screwdriver bits from Phillips to straight bits. They also have adapters that allow you to use sockets for bolts adding more versatilities with the tool making it a more complete toolbox.

Handy Tool Box

Power Tool Combo

2.5 Hd Enclosure Small Lcd Vga Monitor

Type of Cordless Tool Batteries

Every time we use a cordless power tools, be it hedge Trimmer, cordless drill, leaf blower or other type of cordless power tools, we certainly need Cordless tool batteries.

Power Tool Combo

When we choose to buy a cordless power tools, battery voltage is not the only one of the most important factor for our consideration.

Power Tool Combo

Cordless tool batteries available up to 36 volts, but other factors should we take into account also the amp/hour, and battery type too. For 14.4-volt battery and 19.2-volt battery rating will surpass the size of 36-volt battery, if the battery type and amp/hour superior and better than 36-volt sizes.

Rating Basics for Battery

For rate Cordless tool batteries we can use the voltage and amperage hours. Voltage is a measure of the power of an electric current or electric power, while Amperage hours is a measure of how long the battery will last or used.

Based on the information above, the higher voltage followed along with the higher amp/hour will be made more powerful battery. Cordless tool batteries are usually available in sizes 1.4, 2.4 and 3.o amp/hour. We can find the rating amp/hour from a battery at the bottom of the battery or on both sides of the battery.

Types of Battery

Modern cordless power tools have three types of batteries.

Ni-Cad = Nickel-Cadmium (can be 400 times recharged before replacement), Ni-MH = Nickel Metal Hydride (more than 400 times recharged before replacement), Li-Ion = Lithium-Ion (more than 1,200 times recharged before replacement claim up by manufacturer).
Charging Time

Many older battery requires recharging for six hours and we can only use for one hour of work time. We need to consider this when we bought Cordless tool batteries, if we have a lot of work would not be time thrown away just to wait for recharging the battery. And to overcome this problem there must be a way out is by using type Li-Ion battery or Lithium-Ion battery which takes only 15 minutes to recharge.

Maintenance and Stability

For the Maintenance and Stability we usually follow the recommendation of the factory, this will cause a high cost in terms of replacement batteries. As well as other parts of the equipment, cordless tool batteries have an expected service life. Often the two battery replacement is more expensive than buying cordless power tools with charge plus two batteries. More economical when buying cordless power tools are new, rather than replace the cordless tool batteries worn out.

Type of Cordless Tool Batteries

Power Tool Combo

Special Price!!! DEWALT DCK655X 18-Volt XRP 6 Tool Combo Kit with Impact Driver

Nov 02, 2011 05:01:45

Click for larger image and other views

>> Click here to update Cheapest prices for DEWALT DCK655X 18-Volt XRP 6 Tool Combo Kit with Impact Driver <<

DEWALT DCK655X 18-Volt XRP 6 Tool Combo Kit with Impact Driver Feature

• DCD950 XRP 18-volt cordless hammerdrill with patented 3-speed all-metal transmission delivers up to 450 units watts out
• DC390 XRP 18-volt circular saw with 6-1/2-inch carbide blade can cut 2-by-4s at a 45 degree angle in a single pass
• DC385 XRP 18-volt cordless reciprocating saw with keyless blade clamp allows for quick blade changes
• DC825 18-volt impact driver with 1,330 inch-pounds of maximum torque
• DC411 18-volt cut-off tool with 6,500 rpm provides high power for cutting and grinding applications
• DW919 18-volt flexible floodlight provides hands-free use

DEWALT DCK655X 18-Volt XRP 6 Tool Combo Kit with Impact Driver Overview

On the jobsite or at home, you won't find a better suited tool for your projects than those from DEWALT. In carpenter circles and do-it-yourselfer groups you hear talk about the big yellow tools. If you want to start with a great selection of cordless power tools to tackle your next job, the DEWALT DCK655X 18-volt XRP cordless 6-tool combo kit is not the one to pass up. This six-pack of tools includes the DCD950 XRP 18-volt cordless hammerdrill that features the DEWALT patented 3-speed all-metal transmission for durability and 1/2-inch self-tightening chuck for ease of use and superior bit retention. Another big yellow tool in this collection is the DEWALT DC390 XRP 18-volt circular saw with 6-12-inch carbide blade and rip fence that can take on 2- by-4-inch wood at a 45-degree angle in a single pass. Store the entire six-piece collection in a rugged contractor bag for easy portability.

DEWALT DCK655X 18-Volt XRP 6 Tool Combo Kit with Impact Driver Specifications

Featuring a series of tools that are both powerful and versatile, the DEWALT 18-Volt XRP Ni-Cad DCK655X Six-Tool Cordless Combo Kit makes it easy to get jobs done quickly. Each tool features a balanced body that's easy to control, plus smart design details that allow for application-specific performance. Each component is powered by DEWALT's XRP extended run time battery system.

DCK655X Cordless Six-Tool Combo Kit At a Glance: 18-volt cordless hammer drill with patented three-speed, all-metal transmission 18-volt circular saw with 6-1/2-inch carbide-tipped blade 18-volt reciprocating saw featuring keyless blade change 18-volt impact driver with 1,330 inch-pounds of maximum torque 18-volt cut-off tool delivers 6,500 rpm for cutting and grinding 18-volt flexible floodlight provides hands-free use Three-year limited warranty, one-year free service, and 90-day money-back guarantee

Kit includes a hammer drill, circular saw, reciprocating saw, impact driver, cut-off tool, and flexible floodlight.

Fast, Powerful Hammer drill with Three-Speed Transmission
Built to deliver fast, dependable results, the DCD950 XRP 18-Volt Cordless Hammer Drill/Drill/Driver delivers 450 unit watts out for effective drilling and fastening in a wide variety of materials. Its patented, three-speed, all-metal transmission matches the drill's performance to the task at hand for efficiency, improved run time, and reduced wear and tear on the tool's motor.

This tool also offers a heavy-duty, 1/2-inch, self-tightening chuck with bit-gripping strength. When placed in hammer drill mode, the tool delivers 8,500 to 34,000 beats per minute for making holes in masonry. In addition, an LED work light near the trigger provides increased visibility when you're working in dark or confined spaces. The tool's well-balanced body and mid-handle, comfortable grip help keep you in control.

Circular Saw with Carbide-Tipped Blade
Able to deliver speeds up to 3,700 rpm for fast rip cuts and cross cuts, the DEWALT DC390 XRP 18-Volt Circular Saw is both versatile and durable. The 0 to 50-degree bevel capacity provides cutting solutions in a broad range of applications. The saw comes equipped with a 6-1/2-inch carbide-tipped blade and offers an impressive capacity at both 90 degrees (2-7/16-inches) and 45 degrees (1-5/8-inches). This means it can cut two-by-fours at a 45-degree angle in a single pass.

Other design highlights include a fan-cooled motor with replaceable brushes and a high-strength, all-metal shoe and upper guard.

Reciprocating Saw with Four-Position Blade Clamp
Quick, versatile, and ready for a range of cutting applications, the DC385 XRP 18-Volt Reciprocating Saw offers a stroke length of 1-1/8 inches, variable speed control ranging from 0 to 3,000 spm, and a four-position blade clamp that allows flush cutting.

This saw offers an anti-slip comfort grip for increased control and reduced user fatigue. Other key features include an adjustable pivoting shoe and trigger lock for repeat cutting. For added convenience, the blade clamp features an easy-to-operate lever that allows for quick, keyless blade changes.

Compact, Heavy-Duty Impact Driver
The DC825 18-Volt Impact Driver is capable of delivering 1,330 inch-pounds of torque. Its variable-speed trigger allows you to select speeds from 0 to 2,400 rpm. Also, the driver delivers 0 to 2,700 impacts per minute for quick results with minimum effort.

In addition, this impact driver's frameless motor features replaceable brushes for improved durability and extended tool life. A durable magnesium gear case and an all-metal transmission also contribute to the tool's durability. Additionally, the driver's heavy-duty impact mechanism directs torque to the fastener without kickback.

Versatile Cut-Off Tool
Delivering up to 6,500 rpm, the DC411 18-Volt Cut-Off Tool makes quick work of a variety of cutting and grinding tasks. Its low-profile gear case and jam-pot design provide precise gear alignment for smooth, quiet transmission and also allow the tool to fit in tight spaces. A quick-change, wheel release provides fast, tool-free wheel removal.

This cut-off tool also features a convenient trigger switch and detachable two-position side handle for comfort and control. This DEWALT cordless cut-off tool includes Type 1 and Type 27 guards.

High-Powered Floodlight with Flexible Neck
Rounding out this Cordless Four-Tool Kit is a powerful DW919 18-Volt Floodlight. This heavy-duty light features an easy-to-replace XENON bulb that can light up any crawl space, electrical panel, or hard-to-see area. The flexible neck can be wrapped around a two-by-four, pipe, or virtually anything else on the job site. Additionally, the light can be pointed at your work area, so you can work with both hands. Run time is approximately three hours on a newly charged 18-volt XRP battery.

XRP Extended-Life Battery System
Two XRP Ni-Cad extended run time batteries keep all of these tools running at optimum levels. They provide up to 40 percent more run time than standard Ni-Cad batteries. Additionally, any XRP battery can be used with any 18-volt DEWALT tool, which allows you to expand your toolkit. Also, the one-hour Ni-Cad charger helps maintain power to your packs all day long.

The Six-Tool Combo Kit features a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box
DCD950 XRP 1/2-inch, 18-volt hammer drill/drill/driver, DC390 XRP 18-volt circular saw, DC385 XRP 18-volt reciprocating saw, DC825 18-volt impact driver, DC411 18-volt cut-off tool, DW919 18-volt flexible floodlight, one-hour Ni-Cad charger, two 18-volt XRP Ni-Cad batteries, 360-degree side handle, 6-1/2-inch carbide-tipped circular saw blade, Type 1 and Type 27 guards, wrench, backing flange, Type 1 wheel, two-position side handle, and contractor bag.

Keep your cordless power tools and batteries in this durable contractor bag.

SAVE NOW on the special offers below!

Available In Stock.

This DEWALT DCK655X 18-Volt XRP 6 Tool Combo Kit with Impact Driver ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Limited Offer Today!! DEWALT DCK655X 18-Volt XRP 6 Tool Combo Kit with Impact Driver Black Friday and Cyber Monday Deals

Battery Power Tools

Air Tools Beginner's Guide

Buying air power tools for the first time can be a daunting task-as can finding the right tool anytime. In an effort to make your eventual purchase more enjoyable and rewarding, I'm presenting you with this air power tools buying guide. I'd recommend printing it out or bookmarking this article as a guide.

Power Tool Combo

The first thing you need to know is that there's an air power tool for virtually any job out there-and I mean any job. And the second crucial point to remember is that all air power tools require a separate air compressor. Many first-time tool buyers don't realize this or forget. Keep that in the back of your mind always.

Power Tool Combo

Let's talk about air compressors for a moment. They are not all the same. When you buy an air power tool, it will have a PSI (pressure per square inch) rating. You need a air compressor with the same PSI capability. It should go without saying that your air hoses and connections must match perfectly. You want a tight fit.

Two main types of air compressors are: compact and piston-type.

Compact compressors don't use a tank to store compressed air. As such, the compact compressor runs while giving your tool the air it requires. The benefit of compact compressors are the ability to take them anywhere with ease, because they are small and light. However, this is a tradeoff. While being small and light, they lack power. If you're going to doing any power painting, for instance, a compact compressor will most likely be inadequate.

Piston-type compressors, on the other hand, are more powerful. They have a tank that stores the compressed air. The compressor doesn't need to run constantly like the compact compressors do. Instead, it only runs when the air needs to be adjusted back to a certain pressure. The piston-type compressors have two stage models-single and double. If you're doing a heady-duty job, it's best to get a double-stage compressor.

Perhaps one of the most common air power tool bought is a nail gun, so let's go over some quick basics about them.

Nail guns come in two main varieties: coil and stick. A coil-based nail gun holds the nails in a drum-like container. Typically, these guns will hold a few hundred nails. The stick-based nail guns are for your smaller, general jobs. They usually hold a couple dozen or so nails. Unless you're doing some construction or a very large project, a stick-based gun will do the job.

When buying an air-powered nail gun, think about what you intend to use it for. Many nail guns are built with a specific task in mind. Some examples of task-based nail guns are: framing nail guns, finishing nail guns, roofing nail guns, etc.

Finishing nail guns are more for your light work, while framing nail guns are for heavy-duty work.

Just like anything great in life, air power tools come in a variety of sizes and loaded features. As to brands, that's really a personal question. Some people become loyal to specific brands. If you're not sure what to look for, try Bostitch, Craftsman, DeWalt, Milwaukee, and Porter-Cable first.

Air Tools Beginner's Guide

Power Tool Combo

Hd Media Streamer Vitamin Immune System 7In Portable Tv